Metal Catalysts Research Articles

Surface-Enriched Room-Temperature Liquid Bismuth for Catalytic CO2 Reduction.

Bismuth-based electrocatalysts are effective for carbon dioxide (CO2) reduction to formate. However, at room temperature, these materials are only available in solid state, which inevitably suffers from surface deactivation, declining current densities, and Faradaic efficiencies. Here, the formation of a liquid bismuth catalyst on the liquid gallium surface at ambient conditions is shown as its exceptional performance in the electrochemical reduction of CO2 (i.e., CO2RR). By doping a trace amount of bismuth (740ppm atomic) in gallium liquid metal, a surface enrichment of bismuth by over 400 times (30 at%) in liquid state is obtained without atomic aggregation, achieving 98% Faradic efficiency for CO2 conversion to formate over 80 h. Ab initio molecular simulations and density functional theory calculations reveal that bismuth atoms in the liquid state are the most energetically favorable sites for the CO2RR intermediates, superior to solid Bi-sites, as well as joint GaBi-sites. This study opens an avenue for fabricating high-performing liquid-state metallic catalysts that cannot be reached by elementary metals under electrocatalytic conditions.

Electrochemical Reductive Cross-Coupling of Alkyl or Alkenyl Halides with gem-Difluoroalkenes.

Herein, we describe an electroreductive cross-electrophile coupling protocol for the construction of valuable monofluoroalkenes from easily accessible alkyl or alkenyl halides with gem-difluoroalkenes. The reaction can be conducted under sustainable and mild conditions delivering valuable and functionalized monofluoroalkenes with excellent Z-selectivity. The protocol's most notable advantage is the in situ release of nickel catalyst from the inexpensive electrodes without the addition of extra hazardous metal catalyst and superstoichiometric reductant.

Indium(III)-Catalyzed Haloalkynylation Reaction of Alkynes.

Green chemistry strives for sustainability at the molecular level and is gaining increasing relevance in the development of chemical reactions. The haloalkynylation reaction is a highly atom-economical C-C coupling reaction that was previously only achieved using transition metal catalysts. It enables the introduction of an alkyne unit and a halogen atom into the target molecule. Herein, we present a haloalkynylation reaction catalyzed by indium(III) halides. The use of indium(III) bromide as a catalyst leads exclusively to the cis addition products with yields up to 86 %. In addition, iodoacetylenes can be applied for the first time for the haloalkynylation reaction of internal alkynes which is an important step forward in the development of industrially relevant and sustainable catalysts. In contrast to gold catalysis, which proceeds via a similar mechanism, the use of alkyl-substituted haloacetylenes as reagents is also possible. Based on 13C labeling experiments and quantum chemical calculations, we postulate two possible mechanisms for the indium(III)-catalyzed haloalkynylation reactions.

Tuning Adsorbate-Mediated Strong Metal-Support Interaction by Oxygen Vacancy: A Case Study in Ru/TiO2.

The adsorbate-mediated strong metal-support interaction (A-SMSI) offers a reversible means of altering the selectivity of supported metal catalysts, thereby providing a powerful tool for facile modulation of catalytic performance. However, the fundamental understanding of A-SMSI remains inadequate and methods for tuning A-SMSI are still in their nascent stages, impeding its stabilization under reaction conditions. Here, we report that the initial concentration of oxygen vacancy in oxide supports plays a key role in tuning the A-SMSI between Ru nanoparticles and defected titania (TiO2-x). Based on this new understanding, we demonstrate the in-situ formation of A-SMSI under reaction conditions, obviating the typically required CO2-rich pretreatment. The as-formed A-SMSI layer exhibits remarkable stability at various temperatures, enabling excellent activity, selectivity and long-term stability in catalyzing the reverse water gas-shift reaction. This study deepens the understanding of the A-SMSI and the ability to stabilize A-SMSI under reaction conditions represents a key step for practical catalytic applications.

Catalytic activity of Ni–Cr–Fe–Mo porous materials for hydrogen evolution reaction in alkaline media

The hydrogen evolution reaction (HER) based on water electrolysis represents an ideal approach for hydrogen production. The advancement of highly active non-precious metal catalysts holds paramount importance. This research employed powder metallurgy sintering to prepare Ni–Cr–Fe and Ni–Cr–Fe–Mo porous materials. It investigated the impact of Mo doping and sintering temperature on the catalytic activity and microstructural influence of hydrogen evolution materials. Furthermore, the materials' electrochemical performance and long-term stability in 6 mol/L KOH were examined. In complicated systems, the current work provides a feasible method for producing hydrogen from Ni–Cr–Fe–Mo porous materials in a strong alkali environment. The results exhibited that when Mo content is 5% and the sintering temperature is 800 °C, the porosity of Ni–Cr–Fe–Mo porous materials is up to 39.9% and the catalytic activity is up to 97%. At the same time, the current density decays to 7.1% after 1000 cycles of electrolysis and shows good HER stability after 48 h. The enhanced catalytic activity for hydrogen evolution emanated from the positive synergy among the transition metal elements.

Photoredox/Bismuth Relay Catalysis Enabling Reductive Alkylation of Nitroarenes with Aldehydes.

The effective transition metal-free photoredox/bismuth dual catalytic reductive dialkylation of nitroarenes with benzaldehydes has been reported. The nitroarene redution through visible light-driven photoredox catalysis was integrated with subsequent reductive dialkylation of anilines under bismuth catalysis to enable the cascade reductive alkylation of nitroarenes with carbonyls. Salient features of this relay catalysis system include mild reaction conditions, no requirement for transition metal catalysts, easy handling, step-economy, and high selectivity.

Effect of Dynamic and Preferential Decoration of Pt Catalyst Surfaces by WOx on Hydrodeoxygenation Reactions.

Catalysts containing Pt nanoparticles and reducible transition-metal oxides (WOx, NbOx, TiOx) exhibit remarkable selectivity to aromatic products in hydrodeoxygenation (HDO) reactions for biomass valorization, contrasting the undesired aromatic hydrogenation typically observed for metal catalysts. However, the active site(s) responsible for the high selectivity remains elusive. Here, theoretical and experimental analyses are combined to explain the observed HDO reactivity by interrogating the organization of reduced WOx domains on Pt surfaces at sub-monolayer coverage. The SurfGraph algorithm is used to develop model structures that capture the configurational space (∼1000 configurations) for density functional theory (DFT) calculations of a W3O7 trimer on stepped Pt surfaces. Machine-learning models trained on the DFT calculations identify the preferential occupation of well-coordinated Pt sites (≥8 Pt coordination number) by WOx and structural features governing WOx-Pt stability. WOx/Pt/SiO2 catalysts are synthesized with varying W loadings to test the theoretical predictions and relate them to HDO reactivity. Spectroscopy- and microscopy-based catalyst characterizations identify the dynamic and preferential decoration of well-coordinated sites on Pt nanoparticles by reduced WOx species, consistent with theoretical predictions. The catalytic consequences of this preferential decoration on the HDO of a lignin model compound, dihydroeugenol, are clarified. The effect of WOx decoration on Pt nanoparticles for HDO involves WOx inhibition of aromatic ring hydrogenation by preferentially blocking well-coordinated Pt sites. The identification of preferential decoration on specific sites of late-transition-metal surfaces by reducible metal oxides provides a new perspective for understanding and controlling metal-support interactions in heterogeneous catalysis.

One-step chemical vapor deposition synthesis of Si NWs@C core/shell anodes without additional catalysts by the oxide-assisted growth mechanism for lithium-ion batteries.

Si NWs@C core/shell anodes for lithium-ion batteries were synthesized via a one-step environmental-pressure chemical vapor deposition (CVD) process utilizing nano-silicon and methane as raw materials. In this structure, the silicon nanowire core is obtained by controlling the temperature above 900 °C to catalyze the growth of nano-silicon particles coated with a natural oxide layer according to the oxide-assisted growth (OAG) mechanism, while the carbon as a protective coating shell is derived from methane cracking. In contrast to the conventional nanowire catalytic approach, this method obviates the addition of metal catalysts while ensuring a straightforward and scalable process. This Si NWs@C electrode displayed excellent electrochemical performance, exhibiting high reversible capacity (745.8 mA h g-1) and excellent cycling stability (91.3% after 100 cycles at 0.5 A g-1).

Methane Combustion Kinetics over Palladium-Based Catalysts: Review and Modelling Guidelines

Fugitive methane emissions account for a significant proportion of greenhouse gas emissions, and their elimination by catalytic combustion is a relatively easy way to reduce global warming. New and novel reactor designs are being considered for this purpose, but their correct and efficient design requires kinetic rate expressions. This paper provides a comprehensive review of the current state of the art regarding kinetic models for precious metal catalysts used for the catalytic combustion of lean methane mixtures. The primary emphasis is on relatively low-temperature operation at atmospheric pressure, conditions that are prevalent in the catalytic destruction of low concentrations of methane in emission streams. In addition to a comprehensive literature search, we illustrate a detailed example of the methodology required to determine an appropriate kinetic model and the constants therein. From the wide body of literature, it is seen that the development of a kinetic model is not necessarily a trivial matter, and it is difficult to generalize. The model, especially the dependence on the water concentration, is a function of not only the active ingredients but also the nature of the support. Kinetic modelling is performed for six catalysts, one commercial and five that were manufactured in our laboratory, for illustration purposes.

Superior Oxygen Evolution Electrocatalyst based on Ni‐Ellagic Acid Coordination Polymer

AbstractThe oxygen evolution reaction (OER) is central to energy conversion technologies, but the high cost and scarcity of commercial noble metal catalysts limit their widespread application. Natural products exhibit great potential in preparing high‐performance electrocatalysts due to their cost‐effectiveness and sustainability. Here, a kind of 1D polymers [M‐EA (M═Co, Cu, Ni)] for oxygen evolution reaction via the complexation of ellagic acid (EA) with metal ions are reported. It is found that Ni‐EA displays a low overpotential (190 mV at 10 mA cm−2) and an ultralow Tafel slope (28 mV dec−1), with a production cost of only 3.6 × 10−2% of IrO2. Density functional theory investigations reveal the electrocatalytic mechanism of the OER. A rechargeable Zn‐Air battery using Ni‐EA+Pt/C as the air electrode shows a lower charging potential and better cycling stability than the IrO2+Pt/C‐based battery. This work provides a train for the development of state‐of‐the‐art OER catalysts.

Magnetic Field Enhanced Cobalt Iridium Alloy Catalyst for Acidic Oxygen Evolution Reaction.

Magnetic field mediated magnetic catalysts provide a powerful pathway for accelerating their sluggish kinetics toward the oxygen evolution reaction (OER) but remain great challenges in acidic media. The key obstacle comes from the production of an ordered magnetic domain catalyst in the harsh acidic OER. In this work, we form an induced local magnetic moment in the metallic Ir catalyst via the significant 3d-5d hybridization by introducing cobalt dopants. Interestingly, CoIr nanoclusters (NCs) exhibit an excellent magnetic field enhanced acidic OER activity, with the lowest overpotential of 220 mV at 10 mA cm-2 and s long-term stability of 120 h under a constant magnetic field (vs 260 mV/20 h without a magnetic field). The turnover frequency reaches 7.4 s-1 at 1.5 V (vs RHE), which is 3.0 times higher than that without magnetization. Density functional theory results show that CoIr NCs have a pronounced spin polarization intensity, which is preferable for OER enhancement.

Bimetallic Ni and Pt single atoms anchored on nitrogen–phosphorus doped porous carbon fibers to achieve significant electrocatalytic hydrogen evolution

The commercial application of water electrolysis for hydrogen production requires the development of low precious metal catalysts with a high crustal abundance. One feasible strategy is to utilize bimetallic catalysts composed of both transition and precious metals. In this study, a novel N/P-doped Ni/Pt bimetallic catalyst is developed (NiPt@C-NP, 3.68 % Ni, 0.2 % Pt) using polyacrylonitrile fibers as an inexpensive carbon source for catalyst support. Due to strong anchoring from the N and P heteroatoms, the nickel and platinum species are mono-atomically dispersed throughout the catalyst. Under acidic conditions, NiPt@C-NP exhibits a hydrogen evolution overpotential of 89 mV (10 mA cm−2), whereas an unsupported platinum catalyst gives an overpotential of 302 mV. The mass activity of Pt in NiPt@C-NP reaches 36.17 A mgPt−1, which is 33 times higher than 20 % Pt/C (1.07 A mgPt−1). Density functional theory (DFT) calculations reveal that synergistic interactions between Ni and Pt significantly increase the density of state near the Fermi level of NiPt@C-NP, resulting in a reduced bandgap and an enhanced charge transfer capability. Furthermore, the Gibbs free energy at the Pt and Ni sites is − 0.25 and − 0.63 eV, respectively, indicating fast reaction kinetics.

Superlative Porous Organic Polymers for Photochemical and Electrochemical CO2 Reduction Applications: From Synthesis to Functionality.

To mimic the carbon cycle at a kinetically rapid pace, the sustainable conversion of omnipresent CO2 to value-added chemical feedstock and hydrocarbon fuels implies a remarkable prototype for utilizing released CO2. Porous organic polymers (POPs) have been recognized as remarkable catalytic systems for achieving large-scale applicability in energy-driven processes. POPs offer mesoporous characteristics, higher surface area, and superior optoelectronic properties that lead to their relatively advanced activity and selectivity for CO2 conversion. In comparison to the metal organic frameworks, POPs exhibit an enhanced tendency toward membrane formation, which governs their excellent stability with regard to remarkable ultrathinness and tailored pore channels. The structural ascendancy of POPs can be effectively utilized to develop cost-effective catalytic supports for energy conversion processes to leapfrog over conventional noble metal catalysts that have nonlinear techno-economic equilibrium. Herein, we precisely surveyed the functionality of POPs from scratch, classified it, and provided a critical commentary of its current methodological advancements and photo/electrochemical achievements in the CO2 reduction reaction.

Improved hydrogen generation via NaBH4 hydrolysis: Synergistic role of sulfur and C4+-Doping unveils (440) high-index facets and modulates Co2+/Co3+ ratios in the Co3O4 lattice

Sodium borohydride (NaBH4) is crucial for eco-friendly “green” hydrogen (H2) storage, employing controlled release through catalyzed NaBH4 hydrolysis, mitigating its inherent sluggish self-hydrolysis. Precious metal catalysts enhance this process, but face scarcity and cost issues hindering widespread use, prompting interest in Co3O4, specifically with (311) orientation for abundant Co2+ sites. However, excess Co2+ on dominant (311) facets limits catalytic efficacy. This study presents a nuanced synthesis of sulfur (S)- and carbon (C4+)-doped Co3O4 that expose high-index (440) facets and optimize Co2+/Co3+ distribution. The catalytic performance of CoSC-0.1-700 on (440) facets demonstrates remarkable hydrogen generation rate of 4.1 L g−1. min−1 within 10.5 min, 1.81×, 2.42×, and 3.83× higher than control samples, and undoped Co3O4 with (311) dominance, and 1.24× higher than (220). An estimated activation energy (Ea) of 33.63 kJ mol−1, comparable to noble metals, indicates high performance and stability over ten (10) cycles. This approach promises sustainable future in "green" H2 production.

Development Trends in Selective Hydrogenation Upgrading of 5-Hydroxymethylfurfural Catalyzed by Heterogeneous Metal Catalysts

Development Trends in Selective Hydrogenation Upgrading of 5-Hydroxymethylfurfural Catalyzed by Heterogeneous Metal Catalysts

Defective Tungsten Oxides with Stacking Faults for Proton Exchange Membrane Green-Hydrogen Generation.

Defects can introduce atomic structural modulation and tailor performance of materials. Herein, it demonstrates that semiconductor WO3 with inert electrocatalytic behavior can be activated through defect-induced tensile strains. Structural characterizations reveal that when simply treated in Ar/H2 atmosphere, oxygen vacancies will generate in WO3 and cause defective structures. Stacking faults are found in defects, thus modulating electronic structure and transforming electrocatalytic-inert WO3 into highly active electrocatalysts. Density functional theory (DFT) calculations are performed to calculate *H adsorption energies on various WOx surfaces, revealing the oxygen vacancy composition and strain predicted to optimize the catalytic activity of hydrogen evolution reaction (HER). Such defective tungsten oxides can be integrated into commercial proton exchange membrane (PEM) electrolyser with comparable performance toward Pt-based PEM. This work demonstrates defective metal oxides as promising non-noble metal catalysts for commercial PEM green-hydrogen generation.

Electrochemical Nitro Reduction to Amines Using Pinacolborane as Reducing Agents

Nitroaromatic compounds, as hazardous industrial pollutants, have long been extensively studied for their conversion into high-value aromatic amines. However, most of these transformation reactions are confined to the use of transition metal catalysts or high-temperature conditions. Therefore, we report an electrochemical approach utilizing Pinacolborane as the reducing agent for the efficient reduction of nitroaromatic compounds. The reaction is characterized by its mild conditions, simplicity in operation, and demonstrates excellent substrate adaptability and functional group compatibility.

Distributed electrified heating for efficient hydrogen production

This study introduces a distributed electrified heating approach that is able to innovate chemical engineering involving endothermic reactions. It enables rapid and uniform heating of gaseous reactants, facilitating efficient conversion and high product selectivity at specific equilibrium. Demonstrated in catalyst-free CH4 pyrolysis, this approach achieves stable production of H2 (530 g h−1 L reactor−1) and carbon nanotube/fibers through 100% conversion of high-throughput CH4 at 1150 °C, surpassing the results obtained from many complex metal catalysts and high-temperature technologies. Additionally, in catalytic CH4 dry reforming, the distributed electrified heating using metallic monolith with unmodified Ni/MgO catalyst washcoat showcased excellent CH4 and CO2 conversion rates, and syngas production capacity. This innovative heating approach eliminates the need for elongated reactor tubes and external furnaces, promising an energy-concentrated and ultra-compact reactor design significantly smaller than traditional industrial systems, marking a significant advance towards more sustainable and efficient chemical engineering society.

Purple Light-Promoted Coupling of Bromopyridines with Grignard Reagents via SET.

Alkyl- and arylpyridines and 2,2'-bipyridines are conventionally prepared by Minisci reactions of pyridines and transition metal-catalyzed coupling reactions of halopyridines. Herein, purple light-promoted radical coupling reactions of 2- or 4-bromopyridines with Grignard reagents in Et2O or a mixture of Et2O and tetrahydrofuran in regular glassware without the need for a transition metal catalyst were disclosed for the first time. Methyl, primary and secondary alkyl, cycloalkyl, aryl, heteroaryl, pyridyl, and alkynyl Grignard reagents were compatible with the protocol. As a result, alkyl- and arylpyridines and 2,2'-bipyridines were easily prepared. Single electron transfer from the Grignard reagent to bromopyridine was stimulated by purple light. An electron extruded from the dimerization of the Grignard reagent worked as the catalyst. Light on/off experiments indicated that constant irradiation was required for product formation. Studies of radical clock substrates verified the involvement of a pyridyl radical from bromopyridine and the noninvolvement of an alkyl or aryl radical from the Grignard reagent. The available proof supports a photoinduced SRN mechanism for the new coupling reactions.

Utilizing Activated Carbon Nanopores for Electrochemical Oxidation of Perylene to Redox-Active 3,10-Perylenedione: Application in Electrochemical Capacitor Electrodes.

We demonstrate that nanopores of activated carbon (AC) function as nanoreactors that oxidize perylene (PER) to a redox-active organic compound, 3,10-perylenedione (PERD), without any metal catalysts or organic solvents. PER is first adsorbed on AC in the gas phase, and the PER-adsorbed AC is subjected to electrochemical oxidation in aqueous H2SO4 as the electrolyte. Because gas-phase adsorption is solvent-free, PER is completely adsorbed on AC as long as the amount of PER does not exceed the saturated adsorption capacity of the AC, which enables accurate control of the amount adsorbed. PER is electrochemically oxidized to PERD in the nanopores of AC at above 0.7 V vs Ag/AgCl. The hybridized PERD undergoes a rapid reversible two-electron redox reaction in the nanopores owing to the large contact interface between the conductive carbon pore surfaces and PERD. The resulting AC/PERD hybrids serve as electrodes for electrochemical capacitors, utilizing the rapid redox reaction of PERD. The hybridization method is advantageous for quantitatively optimizing electrochemical capacitor performance by adjusting the amount of adsorbed PER. Moreover, because PERD hybridization in the AC nanopores does not expand the electrode volume, the volumetric capacitance increases with increasing hybridized PERD content. In three-electrode cell measurements, the volumetric capacitance at 0.05 A g-1 reaches 299 F cm-3, and 61% of this capacitance is retained at 10 A g-1 when 5 mmol of PER is used per gram of AC. Meanwhile, pristine AC delivers 117 F cm-3 at 0.05 A g-1 with a capacitance retention of 46% at 10 A g-1. Two-electrode cell measurements reveal that self-discharge is significantly suppressed by the hybridized PERD when AC/PERD hybrids and AC are used as cathodes and anodes, respectively, compared to that of a symmetrical AC cell. Moreover, PERD does not undergo cross-diffusion in the asymmetrical cells during self-discharge tests for 24 h.